Mini Rotary Evaporator OEM Customization
Rotary evaporator is an ideal instrument necessary for the concentration, drying and recycling relied on by the chemical industry, pharmaceutical industry, foods, environmental protection, universities and colleges, and research laboratories and so on, and especially adaptable to the small scale production unit.
- RE-2000A laboratory rotary evaporator
- RE-3000A rotary evaporator
Technical parameters of rotary vacuum evaporator:
| Relevant Model | RE-2000A
RE-2000AD | RE-3000A
RE-3000AD | RE-5203 | RE-5203A |
| Rotating Flask(L) | 2L + 1L | 3L + 2L | 3L | 3L |
| Optional Rotating Flask(L) | 0.1L, 0.25L, 0.5L | 0.5L, 1L | 2L, 1L | 2L, 1L |
| Receiving Flask(L) | 1L | 2L , 1L | 1L | 1L |
| Lifting Type | Automatic lifting | Automatic lifting | Hand lifting | Automatic lifting |
| Condenser | Vertical | Vertical | Vertical | Vertical |
| Rotation Speed (rpm) | 20-200 | 20-200 | 0-150 | 0-150 |
| Reachable Vacuum Rate | 0.098Mpa (SHB-III Vacuum Pump) |
| Bath Power (kw) | 1.5KW | 1.5KW | 1.5KW | 1.5KW |
| Staic Temp. Control Range & Wave (℃) | RT-99 (170) ±2 | RT-99 (170) ±0.2 | RT-99±0.2 | RT-99±0.2 |
| Power | 220V 50/60Hz | 220V 50/60Hz | 220V 50/60Hz | 220V 50/60Hz |
* Note: Max evaporating speed is affected by operation setting and the performances and matching levels of supporting equipment.
“A”-Automatic lifting. “AD”-Automatic Lifting 170℃ Oil Bath.
Functional configurations of TOPTION lab rotary evaporator:
| Relevant Model | RE-2000A
RE-2000AD | RE-3000A
RE-3000AD | RE-5203 | RE-5203A |
| PTFE Seal Assembly | Have |
| Continuous Charge | |
| Digital Display | Bath Temp.
Rotation Speed | Bath Temp.
Rotation Speed | Bath Temp. | Bath Temp. |
| Taper Joint PTFE Sleeve | Have |
| Low Noise | Have |
| Bath Lift | Have |
| Thermometer Neck For Vapor | Optional |
| Cold Trap | Optional | Optional | Optional | Optional |
| Water Bath Lid | Optional |
| Joint Adaptor | Optional |
| Optional Evaporating Flask | 0.5L | 0.5L, 1L | 100ml, 250ml, 500ml, 1L | 100ml, 250ml, 500ml, 1L |
Main structure features of rotary evaporator laboratory instrument:
1.Main engine component: use antirust aluminium alloy, special engineering plastics, high temperature resistant high quality glass.Compact structure, beautiful appearance, durable and long service life.
2.Main engine transmission: Using precision gear motor, electronic speed, gear and rack type transmission device.Increase the shaft tube aperture, so evaporation tube is 1.5 times bigger than general instruments, improve the efficiency of evaporation.
3.Lifting structure: use mechanical and electrical contact principle, hydraulic auxiliary drive to rising fast, steady decline functions, improve the efficacy.
4.Evaporating pipeline: high quality high temperature resistant glass, fluoroplastics recombination. Two end connect with “silicon fluoride compound sealing ring”, good vacuum sealing performance. Long service life, and coud disassemble to clean and change.
5.Heating bath: use teflon aluminium alloy recombination bath Ø23 * 13cm, outside has special engineering plastic to protect. Fully enclosed electric heater is installed on the antirust aluminum alloy botton case, stable and reliable, and could move according to evaporation request.
6.Vacuum meter: design equipped with vacuum meter and valve ( prevent the liquid in vacuum pump back flow in rotary evaporator’s glass vessels, help you achieve research success in one time), when vacuum degree becomes the lowest, close valve to keep the vacuum degree display in rotary evaporator, decrease the noise in laboratory, longer the service life of vacuum pump.
